Panel-type Drift Eliminators
Drift and droplet eliminators permit the separation of fluids in a gaseous stream, the most common case of this being the separation of water droplets present in an airstream.
Refill-Tech Solutions' panel-type drift eliminators, fabricated from PVC which meets the CTI136 and ASTM E-84 reference guidelines on flame resistance have been designed to offer high separation efficiency, passing very challenging tests, both for separation efficiency and in terms of high mechanical strength.
They are characterised by significant ease of handling, which facilitates their employment in the plant in the installation phase and during subsequent maintenance works.
On request all these products can be supplied with frames fabricated from various materials, both plastics and metals.
ADVANTAGES
• Low pressure drops
• Mechanical strength
• Simplicity in positioning thanks to their modularity
• Lightweight, which permits easy handling
• Resistance to most chemicals and to biological aggressiona
BLADE (Drift Eliminator – C shape) is a panel-type (but effectively composed of profiles) drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming, which does not require the use of spacers.
Technical Characteristics Material of Construction PVC Length from 1000 to 2500 mm Width from 300 to 600 mm Height 190 mm Maximum Temperature 60°C Maximum Air Velocity 3,5 m/s 
DES 130 (Drift Eliminator – S shape - 130 mm) is a panel-type drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming, which does not require the use of spacers.
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width from 300 to 1000 mm Height 130/200/260 mm Maximum Temperature 60°C Maximum Air Velocity 3 m/s 
DEC 130 (Drift Eliminator – C shape - 130 mm) is a panel-type drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming, which does not require the use of spacers
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width from 300 to 1000 mm Height 130/200/260 mm Maximum Temperature 60°C Maximum Air Velocity 3 m/s 
DEC 140 (Drift Eliminator – C shape - 140 mm) is a panel-type drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming, which does not require the use of spacers.
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width from 300 to 1000 mm Height 140 mm Maximum Temperature 60°C Maximum Air Velocity 4 m/s 
DEC 200 (Drift Eliminator – C shape - 200 mm) is a panel-type drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width 300/600 mm Height 200 mm Maximum Temperature 60°C Maximum Air Velocity 4 m/s 
DES 260 (Drift Eliminator – S shape - 260 mm) is a panel-type drift eliminator obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width 600 mm Height 260 mm Maximum Temperature 60°C Maximum Air Velocity 3 m/s 
CellularMax (Drift Eliminator – C shape – 140 mm) is a cellular drift eliminator obtained by the assembly of thermoformed PVC
Technical Characteristics Material of Construction PVC Length 1200/1500/1800/2100/2400 mm Width 300/600 mm Height 140 mm Maximum Temperature 60°C Drift Rate 0.0005%
Inlet Louvers
IL 65 and IL 80 air inlet louvers permit users to maintain in obscurity water collection basins, thus limiting the formation of algae and avoiding both the intake of foreign bodies or leaves from the surroundings and the water splash-out.
IL 65 (Inlet Louvers – 65 mm) is a panel-type air inlet louver obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width 300/600 mm Height 65 mm Maximum Temperature 60°C Maximum Air Velocity 5 m/s 
IL 80 (Inlet Louvers – 80 mm) is a panel-type air inlet louver obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.
Technical Characteristics Material of Construction PVC Length 1200/1800/2400 mm Width 300/600 mm Height 80 mm Maximum Temperature 60°C Maximum Air Velocity 5 m/s
